If you don't find your
question listed or you need more information, please contact our customer service
centre.
01572 722558 (Oakham)
01365 624109 (Scotland) |
01572 757614 (Oakham)
01365 624109 (Scotland) |
(All fields are required.)
|
|
 |
|
Common questions about electric-fence installation The following questions compose
the majority of calls made to our customer-support staff.
How do I start building my electric fence?
How do I choose the most suitable electric fence energiser?
What is the most common installation error with electric fencing?
My climate and soil make it difficult for me to install a good earthing system.
What alternatives do I have?
What are the advantages of electric fence over conventional barrier fence?
If I use barbed wire, can I electrify it?
How do I use electric fence to contain bulls?
How does an electric fence work with rotational and strip grazing?
Is electric fencing safe for my horses?
Why is electric fence better than other types of horse fences?
What's the best way to fence aggressive horses or stallions?
How do I prevent "cribbing"?
Is electric fence safe for my pets?
Why would I use an electric fence instead of a traditional fence?
Can I electrify an existing wood, vinyl or chain link fence?
How do I start building my electric fence?
For best results, we recommend that you buy an energiser recommended by Rutland
for your application (see energiser selection chart). Ensure you install a good
earth system and test its effectiveness as explained; use high-quality wires with
good conductive characteristics and high specification insulators (Note, energisers
with high joules will require better insulation than low output ones so always select
appropriate products). Service the fence regularly by checking the voltages on the
fence and earth and clearing vegetation growth.
How do I choose the most suitable electric fence energiser?
The energiser you choose depends on many variables, including the type of animal
being controlled, the length of the fence, its location, and even the climate (wet
climates can drain energy from the fence and dry climates can cause earthing problems).
In general, choose a higher powered energiser
than you think you need to handle unexpected challenges such as vegetation and to
allow for possible future expansion of your fence.
What is the most common installation error with electric
fencing?
Ineffective earth systems account for 95 percent of all electric-fencing problems.
When using portable fences, use the correct earth stake as recommended. In dry,
rocky or sandy soil conditions more than one may be necessary. When using mains
energisers in a fixed position, use at least one x two metre long galvanized earth
stake. Make sure to use bolts to attach the earth wire and tighten firmly. The drier
the soil, the more extensive the earth system needs to be. Always check the earth
immediately following installation and at periodic intervals, particularly in summer.
If excessive voltage readings are found, add more earth stakes at 2 metre spacing
until the voltage is within tolerance levels.
For more information, see the
Earth Specifications
section of our web site.
My climate and soil make it difficult for me to install
a good earthing system. What alternatives do I have?
In sandy or rocky soils, in extremely arid climates, or where the ground is frozen
for much of the year, the standard earth system may not prove adequate. In these
situations it may be necessary to wire the fence with alternative wires being live
/ earth. Such a fence will then no longer be dependant on moist soil conditions.
When an animal touches the live and earth wires simultaneously, the current will
travel back to the energiser’s earth system, completing the circuit and delivering
a shock.
For more information, see the
Earth Specifications
section of our web site.
What are the advantages of electric fence over conventional
barrier fence?
Electric fencing costs less, is easier to install, requires less maintenance and
can control livestock better than barbed wire or many other types of fencing. In
addition, livestock are frequently injured by barbed wire and will damage woven-wire
fences by leaning on the fence.
Because livestock avoid contact with an electric fence, it will last longer than
other types of fence. Barbed wire or woven-wire fences may only last 7 - 12 years,
while permanent, high tensile, electric fences can last 20 years.
If I use barbed wire, can I electrify it?
Barbed wire is designed as a physical barrier, using barbs to deter animals. Because
of the barbs, there is a greater chance the animal can become entangled in the wire.
Electrified barbed wire could cause even more damage to the animal therefore barbed
wire should never be electrified. For a selection of safer poly wire and tape, refer
to Rutland’s tape / wire / rope
tabs.
How do I use electric fence to contain bulls?
If normally kept segregated for breeding purposes, bulls or other aggressive livestock
may become highly motivated to escape confinement, especially when nearby cows are
in heat.
To contain bulls, maintain 4,000 volts on the fence line and a minimum of
1.5 joules
of stored energy. Four to five wires are best. For more aggressive animals,
you want the electrified fence to deliver a more intense shock to discourage them
from going near the fence again so higher joules would be desirable on long fences.
How does an electric fence work with rotational and strip
grazing?
Electric fencing is an excellent solution for containing animals on a short-term
or temporary basis, as in rotational or strip grazing. The lightweight mobility
of portable electric fencing is ideal for frequently moving livestock to different
sections of pasture.
Rutland Electric Fencing Company has all the components needed to create grazing
system including: plastic posts, poly wire and poly tape, reels and energisers.
Because pastures frequently are not located near a MAINS power source, a full range
of battery powered energisers is available.
Is electric fencing safe for my horses?
The short sharp shock your horse receives from an electric fence will not injure
it, but will teach it to respect and avoid the fence. Very roughly, the shock produced
by a small energiser is similar to a sharp whack by a riding crop.
Traditional fencing is more apt to injure horses when they get scared or spooked
and attempt to push through or jump over it. A properly installed electric fence
system is the safest, most visible method to keep your horses contained.
Why is electric fence better than other types of horse
fences?
Electric fencing is the most cost effective and efficient method of containing horses
while safeguarding them from injury. Barbed wire, woven-wire, and wooden fences
can injure a "spooked" horse that attempts to run through or jump over them. Injuries
a horse will sustain if it gets tangled in barbed wire may be fatal.
Electric fencing is lower cost, easier to install, requires less maintenance and
controls horses more effectively than traditional fencing.
What's the best way to fence aggressive horses or stallions?
If normally kept segregated for breeding purposes, stallions or other aggressive
horses may become highly motivated to escape confinement, especially when nearby
mares are in heat.
To contain aggressive horses, maintain 3,000 - 4,000 volts to the end of the fence
line. Three or four strands of fence wire are best. The more aggressive the horse,
the more higher the shock must be to discourage them so generally higher joule
energisers are recommended.
How do I prevent "cribbing"?
An electrified wire can easily be added wire to an existing fence. This option can
prevent "cribbing" or chewing the tops of wood fences, as well as keep horses from
jumping, or prevent animal pressure on the fence. Particulary effective is insulator
Part No. 15-155. A range of Rutland insulators
is available to allow an electrified wire to be erected on the top or interior of
the fence. Offset type insulators will put the fence wire 13 – 22 mm out from the
existing fence, preventing animals from pressing against it.
Is electric fence safe for my pets?
The short, sharp shock your pet receives from an electric fence will get their attention,
but not harm the animal. This will teach it to avoid the fence in the future and
stay within the boundary.
Why would I use an electric fence instead of a traditional
fence?
Electric fences are portable and far less costly then a barrier type fence. Additionally
they can be unobtrusive - you do not block the view. Using electric wires on the
top or bottom of a chain link or wood fence can prevent digging under or jumping
over the fence.
Can I electrify an existing wood, vinyl or chain link
fence?
You can easily add an electrified wire to an existing chain link or wood fence. Rutland insulators are
available in a variety of styles that give the flexibility of putting an electrified wire at the outside top of the fence (to keep dogs, cats,
and other animals from climbing or jumping over) or at the outside bottom to prevent
dogs from digging underneath. This is a simple, low cost way to "dog-proof" an existing
fence. Particulary effective for chain link is insulator Part No.
15-139.(Note: you cannot directly electrify a chain link or woven wire fence, as
they are not insulated). |